SOP Title-Operation of Rotary Shaker
- OBJECTIVE
To lay down a procedure for operation of Rotary Shaker.
- SCOPE
This SOP is applicable for operation of Rotary Shaker located at Quality Control,
- RESPONSIBILITY
- QC personal shall be responsible for implementation of
- QC Head – shall be responsible for compliance of this procedure.
- PROCEDURE
- Precautions:
- Always connected the shaker three pin power plugs.
- Precautions:
- First operate the unit without samples place on the plate form.
- Operation Procedure
- Connect the power to the main switch.
- Press the mains to put ON to the shaker.
- Red pilot lamp will glow as power is available for the Unit.
- Time will starts blinking indicate 00.
- In this mode the shaker can be start and used by passing the timer ON without timer.
- For Using the shaker in “ Time Mode” press the “SET TIME”
- It will show “00”
- Here desired time can now be selected by pressing “SET TIME” Switch.
- The shaker now is ready to operate in “Timer Mode”.
- Cleaning:
- Daily clean the instrument with clean and dry lint free cloth to remove the dust.
- ABBREVIATION(s)
| Abbreviation | Full Description |
| SOP | Standard Operating Procedure |
| QC | Quality Control |
| QA | Quality Assurance |
*Note – Ready to use SOP available in “DOWNLOAD” Section.