Title: Entry Exit Procedure in Core Area
- Objective:
To lay down procedure for Entry/ Exit through primary change room.
- Scope:
This procedure is applicable to all personnel (Gents/ ladies) entering and leaving the change room.
- Responsibility:
All employees: Responsible follow the written procedure for Entry and Exit.
- Accountability:
Head QA/All Departments.
- Procedure:
- Definitions:
Primary Change Room or General Change Room: Room or cubicle provided to facilitate main and single entry with GMP Gowning system which leads to the corridor of core areas or critical areas like Production, QC and Warehouse Departments.
- Procedure:
| 5.2.1 | Procedure for entry in the change room | |
| 5.2.1.1 | After entering the change room, remove the street footwear and keep them in the street footwear rack of the cross over bench. | |
| 5.2.1.2 | If required use the toilet and wash basins before removing the street footwear. | |
| 5.2.1.3 | Keep the personal belongings in the lockers provided. | |
| 5.2.1.4 | Remove the street clothes and keep them in the cupboard provided for keeping street clothes. | |
| 5.2.1.5 | Wash the hands in the wash basin provided. | |
| 5.2.1.6 | Cross the cross over bench and enter the other side of the change room. | |
| 5.2.1.7 | Collect the clean primary uniform from the locker provided and wear the same. | |
| 5.2.1.8 | Wear the cap and ensure that the hairs are covered properly. Check the proper wearing of the uniform and cap in the mirror provided. | |
| 5.2.1.9 | Wear the factory footwear kept on the footwear rack of the cross over bench. | |
| 5.2.1.10 | Disinfect the hands using the disinfectant solution.
Pull the door and enter the primary corridor of the production area. |
|
| 5.2.2 | Procedure for exit during lunch break/ end of shift | |
| 5.2.2.1 | After entering from the primary corridor, push the door to enter the change room. | |
| 5.2.2.2 | Remove the primary footwear and keep them on the footwear rack of the cross over bench. | |
| 5.2.2.3 | Remove the primary uniform and store in the locker provided. | |
| 5.2.2.4 | Cross the cross over bench and enter the other side of the change room. | |
| 5.2.2.5 | Wear the street clothes after removing them from the locker provided. | |
| 5.2.2.6 | Wear the street footwear kept on the rack provided for street footwear. | |
| 5.2.2.7 | Exit from the door of the change room. | |
| Note:
Primary uniforms are to be dropped in the bin provided in the primary change room on Wednesday and Saturday for washing (Twice a Week). |
||
- Abbreviation:
| Abbreviation | Expansion |
| QAD | Quality Assurance Department |
| QAP | Quality Assurance Procedure |
| No. | Number |
| GMP | Good Manufacturing Practice |
*Note – Ready to use SOP available in “DOWNLOAD” Section.